A Brazilian contractor needed a compressed air solution for outdoor drilling and construction work. The job sites were not fixed, and some locations had no convenient power connection.
📌The main requirements were:
🔧Enough air flow for pneumatic equipment
📏Suitable working pressure for drilling
⚡Diesel power for outdoor operation
🚚A machine suitable for use at changing job sites
The contractor contacted YG Machinery to check a Portable Screw Compressor for the project. The team provided the available configurations and a quotation according to the required air flow and pressure.
Selecting the RightPortable Screw Compressor for the Brazilian Project
The contractor compared the available configurations according to the requirements of the working equipment. Instead of looking at the price alone, the buyer focused on the specifications that directly affect compressed air supply.
🔎The main selection points were:
💨Air flow: Rated FAD ranges from 18 m³/min to 36 m³/min. The required air volume depends on the connected pneumatic equipment.
📊Pressure: The available rated pressure ranges from 18 bar to 30 bar. The selected pressure should match the working requirements.
⚙️Engine: The listed configurations use a 162 KW YUCHAI engine, providing the power source for outdoor operation.
🔩Air end: The range includes single stage and two stage configurations for different working requirements.
🚛Weight: The machines range from 3000 KG to 5600 KG, which is also important when planning transportation and site use.
A small rotary screw air compressor may be considered for applications with lower air demand. For larger drilling equipment, the required air flow and pressure become more important than simply choosing a smaller machine.The buyer therefore compared the compressor specifications with the actual equipment used at the project site. This helped narrow down the suitable configuration before placing the order.
Mobile Screw Air Compressor for Drilling and Construction
The project required compressed air at outdoor locations rather than inside a permanent workshop. A Mobile Screw Air Compressor was therefore suitable for the working environment.
⚙️The equipment can be used as an independent compressed air source for applications such as:
🛠️Drilling operations
🔨Pneumatic construction tools
🔧Outdoor maintenance work
⚙️Other equipment that requires compressed air
For drilling applications, a Portable Rotary Screw Air Compressor needs to provide enough air flow and pressure for the connected equipment. If the air supply is too low, the equipment may not operate as required.
The diesel power source was also important for this project. A Diesel Screw Compressor does not depend on a fixed electrical connection, making it practical for outdoor work areas where grid power may not be available.
The mobile setup also allowed the compressor to work alongside other construction equipment as the project moved between different locations. This reduced the need for a permanent compressor installation at each site.
Portable Screw Compressor Operation at the Brazil Job Site
After arriving in Brazil, the compressor was used to support the contractor’s outdoor work. The machine worked as the air supply for pneumatic equipment used during drilling and construction activities.
⚙️The working process was straightforward:
🔋The diesel engine provides power for the compressor.
💨The screw air end compresses the air.
🔗Pressurized air is supplied to the connected equipment.
🔄The compressor continues supplying air according to the working demand.
For contractors comparing a Mobile Screw Compressor for sale, daily operating conditions should be considered before purchase. The air requirement of the connected equipment, working pressure, site conditions, and transportation plan all affect the final choice.
A Small Screw Air Compressor can be useful for applications where the required air volume is lower. Larger air requirements call for a configuration with suitable rated FAD and pressure.
The project provided the Brazilian contractor with a mobile compressed air solution for changing outdoor work locations.
✅The main results were:
💨Compressed air could be supplied at outdoor job sites.
⚡Diesel power reduced dependence on fixed electricity.
📊Different air flow and pressure options supported equipment selection.
🚚Machine weight could be considered when planning transportation.
🛠️The compressor could work with drilling and construction equipment at temporary sites.
The project also showed why compressor selection should be based on the complete working requirement. Air flow, pressure, power source, air end, and weight provide a more useful basis for comparison than purchase price alone.
YG Machinery supplies a range of equipment for construction, road, and material handling projects. In addition to air compressors, you can also check our Cold Paint Road Marking Machine for road marking work, Electric Forklift Truck for indoor and warehouse material handling, and Small Backhoe Loader for digging, loading, and site work.
📩If you are planning a new project, send us your application and working requirements. Our team can provide suitable equipment options, price, and quote for your needs.【WhatsApp/WeChat/Phone/Skype】+86 13937183602
