This case is about a Dust Control Fog Cannon sold by YG Machinery to a quarry in Fiji. The site did not need a bigger water truck. It needed a directed dust control tool. The tool had to work in the dry season. It had to use less water. It had to fit the daily work flow. The final choice was a YG-40 unit, supplied as a trailer mounted fog cannon. The unit was electric. It ran on the site’s 380V supply. It arrived before the dry season peak. Then it went to work.
Dust Control Fog Cannon Brief: Fiji Quarry Dust Pressure
Fiji’s dry season runs from May to September. Crushing, stockpiling, and road hauling all raise dust. Water is not always abundant. Local rules also require clean water for dust spraying. Chemical additives need approval. A water truck helps, but it stops. Then dust comes back. The site needed a unit that could spray at the dust source. It could not just wet the road after dust had spread. The quarry also faces community pressure. Nearby residents notice dust. Complaints do not stay quiet. The site manager wanted a tool that could work during crushing hours. It had to be simple to run. It had to be easy to move.
The customer is an aggregate quarry. It supplies road and infrastructure projects. Its environmental management plan includes dust control clauses. Those clauses are now checked more closely. Community complaints are also rising. The site manager gave clear needs. The unit had to move between the crushing point and the main haul road. It had to cover open dust areas at the stockyard. Water use had to stay under control. The control system had to be simple. No operator sits on the unit all day. These needs pointed to dust control fog cannon, not fixed sprinklers. A fixed system would be hard to move. A water truck alone would miss the dust source. The site needed directed spray with a small footprint.
YG Machinery recommended the YG-40 electric model. Its spray reach fits the crusher, stockyard, and road entry. The Mist Cannon matched the site’s storage and refill plan. Its motor setup fit the site’s 380V supply. The unit was mounted on a trailer for quick moves between work areas. The trailer also kept it stable on uneven ground. The site did not need the largest model. It needed the model that fit the work.
Dust Control Fog Cannon Run Feedback: What Changed on Site
Visible dust at the crusher dropped. The fine spray knocked down dust near the source. Dust did not spread as far across the site. Workers noticed the change first at the crushing point.
Water truck use went down. The Fog Cannon Sprayer could work at fixed points. The water truck did not need to run all day. This cut fuel and driver time, and it kept water available for other site needs.
Community complaints fell. Dust complaints dropped after the unit ran steadily. The site did not claim zero dust. It claimed fewer complaints and better control. That was the result the site manager cared about most.
Water use stayed inside the plan. The unit ran during crushing hours. It shut off when the crusher stopped. This simple rule saved water. It also kept the site within its environmental plan during the dry season.
“The water truck stopped, and dust came back fast. This unit sits by the crusher. When it runs, the dust drops. The neighbors complain less.”
“Two workers learned the remote in a short time. We do not need a full-time operator. Start it when the crusher runs. Shut it off when we stop.”
“Water use is within our plan. Fiji’s dry season is tight. If it used water like a truck, we could not run it. With our tank, it works.”
These comments are short. They are also direct. The site manager did not talk about advanced features. He talked about dust, labor, and water. Those three points decided the purchase.
The Dust Suppression Cannon worked in Fiji because it matched the site. It was not the largest model. It did not offer the longest spray distance. It fit the dry season, the water limit, the power supply, and the daily work flow. A larger fixed unit would have been hard to move. A water truck alone would have used more water and missed the dust source. For YG Machinery, the lesson is simple. The right unit is the one that keeps working when the site turns dry and dusty. The right unit is the one the site can run every day without extra labor or extra water. That is the match that matters.
If your site faces the same dust pressure, start with three facts. Tell us your dust source, your water supply, and your power supply. We will check the spray distance, tank size, and mounting type that fit your work. Send your site details and we will recommend the right model, not the biggest one.
