A Malaysian bottle producer needed a practical solution for making PET water bottles for its growing local market. The company wanted to produce bottles in different sizes while keeping production stable and easy to manage. After discussing the bottle size, output target, and production conditions, YG Machinery supplied a PET Blow Molding Machine solution for the project. The equipment is designed to heat PET preforms and form them into finished plastic bottles through controlled blowing.
PET Blow Molding Machine Technical Parameters
| Parameter | YG-2L-2 | YG-2L-4 | YG-2L-6 | YG-2L-8 |
| Cavity | 2 | 4 | 6 | 8 |
| Theory Output (bottles/hr) | 2000-2700 | 4000-5000 | 6000-7200 | 8500-9000 |
| Max. Volume | 2L | 2L | 2L | 2L |
| Bottle Mouth Diameter | 80mm | 28-38mm | 28-38mm | 28-38mm |
| Bottle Max. Diameter | 100mm | 100mm | 100mm | 100mm |
| Bottle Max. Height | 330mm | 330mm | 330mm | 330mm |
| Light Tube Quantity | 16pcs | 40pcs | 64pcs | 32pcs |
| Light Tube Power | 1.5KW | 1.5KW | 1.5KW | 1.5KW |
| Max. Heating Power | 24KW | 40KW | 80KW | 80KW |
| Installation Power | 26KW | 60KW | 85KW | 85KW |
| Actual Consumption | 19KW | 30KW | 40KW | 40KW |
| Work Pressure (low) | 7-9kg/cm² | 7-9kg/cm² | 7-9kg/cm² | 7-9kg/cm² |
| Low-Pressure Air Use | 1000L/min | 1600L/min | 1600L/min | 1600L/min |
| Blow Bottle Pressure | 25-35kg/cm² | 25-35kg/cm² | 25-35kg/cm² | 25-35kg/cm² |
| High-Pressure Air Use | 1500L/min | 3000L/min | 4000L/min | 4800L/min |
| Temperature Range | 10℃ | 10℃ | 10℃ | 10℃ |
| Cooling Water Flow | 30L/min | 88L/min | 88L/min | 88L/min |
| Machine Size (L×W×H) | 2.5×1.6×1.7m | 4.5×2.0×2.3m | 6.5×2.0×1.9m | 6.7×2.0×2.3m |
| Machine Weight | 2.0ton | 4.0ton | 5.5ton | 6.0ton |
PET Blow Molding Machine for Malaysia
The customer’s first concern was production capacity. The existing setup was not suitable for the customer’s planned production volume, so the customer needed a new solution that could support a more organized production process.
There were several points that needed to be clarified before choosing the equipment:
- The type and size of PET bottles to be produced
- The expected production demand
- The available factory space
- The existing supporting facilities
- The customer’s future production plan
The customer did not want to select equipment only according to the highest advertised capacity. A machine that is too large can also require more factory resources and a different supporting setup.
YG Machinery therefore started with the customer’s actual production requirements. The sales team discussed the intended application and production conditions with the customer and used this information to narrow down the suitable equipment configurations.
This gave the Malaysian customer a clearer basis for making the purchase decision.
Automatic PET Bottle Blowing Machine Selection
After understanding the customer’s requirements, YG Machinery compared the available equipment configurations.
The main consideration was whether the machine could provide enough production capacity for the customer’s planned operation while fitting the existing factory conditions.
The selection process focused on:
- Production demand: The configuration needed to match the customer’s planned workload.
- Bottle application: The equipment needed to be suitable for the customer’s PET bottle production.
- Factory conditions: The customer needed to confirm that the available production area could accommodate the equipment.
- Supporting systems: The customer also needed to prepare the required power, compressed air, and cooling facilities.
- Future use: The selected pet blow moulding machine needed to make sense for the customer’s longer-term production plan.
YG Machinery explained the differences between the configurations so the customer could compare them based on actual needs.
This approach helped the customer avoid choosing a machine simply because it had a larger capacity. The final equipment decision was connected to the customer’s production plan and factory conditions.
Production Process of Water Bottle Blowing Machine
After receiving the equipment, the Malaysian customer could organize bottle production around a clearer workflow.
The basic production process includes:
- PET preform preparation:PET preforms are prepared before entering the bottle forming process.
- Heating:The machine heats the preforms so they can be formed inside the mold.
- Mold forming:The heated preforms are transferred into the bottle mold.
- Air blowing:Compressed air expands the heated material against the mold wall.
- Bottle output:The formed PET bottles are removed from the mold and continue to the next production stage.
This process gives the customer a more organized way to handle PET bottle production. The heating and blowing operations are handled within the equipment rather than requiring separate manual forming steps.For the Malaysian customer, this was important because the goal was not simply to add another machine. The customer needed a production solution that could fit into the planned workflow.
Results After Receiving the Water Bottle Blowing Machine
After the plastic bottle manufacturing machine was delivered, the customer had a clearer production setup for PET bottle manufacturing.The main improvements were related to production organization and capacity planning, rather than a single performance figure.
| Before Purchase | After Receiving the Equipment |
| Existing setup could not meet planned production needs | Production could be organized around the selected equipment |
| Production capacity was difficult to plan | The selected configuration provided a clear production reference |
| Equipment selection was still uncertain | The customer had a configuration matched to the project requirements |
| Supporting requirements needed further planning | Factory preparation could be arranged around the equipment |
| Bottle forming involved a less integrated workflow | Heating and blowing were combined in the production process |
| Future production planning was more difficult | The customer had a clearer basis for organizing future output |
Malaysia Project Summary
This Malaysia case started with a practical production problem. The customer needed new equipment because the existing setup could not support the planned PET bottle production.
YG Machinery helped the customer move through the selection process step by step:
- Identify the production problem
- Confirm the bottle application
- Review the expected production demand
- Compare suitable configurations
- Check factory and supporting conditions
Arrange the equipment for productionIf you plan to buy a bottle blower machine, you can send YG Machinery your bottle type, production requirements, and factory conditions. The team can provide a suitable equipment recommendation, quote, and current price for your project.
