Qatar Project Needed a Concrete Wall Saw for Sale
In Doha, Qatar, a local contractor runs a mid-sized contracting company. In late 2025, his team won a renovation project. They had to cut elevator openings and equipment passages through 510mm C40 reinforced concrete walls. Total cutting area: about 86 square meters. Time: only 45 days. The contractor needed a reliable concrete wall saw for sale that could handle the thick walls and the 50°C heat.His old breaker hammer was too slow. It also caused vibration.
His electric wall saw machine overheated after two hours in the Qatar summer. The crew stopped and waited for the motor to cool. Every day, they lost half their working time. The project was falling behind. The owner threatened penalties. The contractor needed a better solution.
Precision Fix with a Concrete Wall Sawing Machine
The first problem was accuracy. The elevator openings needed ±5mm tolerance. The crew used hand-held cutters. They often cut 10–15mm off the line. That meant rework, wasted time, and extra cost.
YG Machinery recommended the YG-700TM. It runs on a track system. The saw head moves along the rail. The cut stays straight and clean. The result is ±3mm tolerance. That was good enough for the elevator installation. The team no longer needed to patch or grind the edges.
How a Hydraulic Wall Saw Changed the Job Site
The second problem was cutting depth. The wall was 510mm thick. The old saw could not cut through in one pass. The crew had to flip the machine and cut from both sides. That doubled the work time.
The YG-700TM has a maximum cutting depth of 730mm. It cuts through 510mm concrete in a single pass. The oil pump runs at 30KW with water cooling. This keeps the motor stable even in high heat. The hydraulic system has three pressure stages and 210bar max operating pressure. It delivered steady power all day. The team cut faster and with less effort.
Recommended Specs of Concrete Wall Saw for Sale
| ydraulic Oil Pump | Model | YG 700 |
| Max. power | 25KW | |
| Motor cooling method | Air cooling | |
| Rated voltage | 380V 50HZ | |
| Pressure stages | 3 | |
| Max. operating pressure | 200bar/20Mpa | |
| Oil flow rate | 30-80L/min | |
| Dimensions | 600mm*650mm*1050mm | |
| Weight | 220kg | |
| WallSaw | Saw blade diameter range | 800-1600mm |
| Cutting depth | 620mm | |
| Max. working pressure | 180bar/18Mpa | |
| Max. oil flow rate | 100l/min | |
| Gearing | Gear | |
| Rotation speed | 450/950/1300Rpm | |
| Dimension | 400mm*420mm*400mm | |
| Weight | 38kg |
Results from the Concrete Wall Sawing Machine
The numbers tell the story. The team finished the 86 square meter cutting job in 32 days. The original plan was 45 days. They saved 13 days.
Daily cutting rate: about 2.7 square meters.
Accuracy: all openings within ±3mm.
Labor cost: reduced by 40%.
Rework: zero.
Safety: zero structural damage, zero accidents.
The cut edges came out smooth. No patching or grinding was needed. Each opening was finished in a single pass. The crew did not have to flip the machine or cut from both sides. That saved hours on every opening.
The saw ran six hours a day in 50°C heat. It did not overheat. It did not stop. The old electric wall saw machine could only run two hours before cooling down. The difference was clear.
The owner’s engineer inspected every opening. All passed on the first check. The contractor said, “The YG wall saw worked for a full afternoon in 50°C heat without stopping. This project finished early because of it.” The concrete wall saw for sale from YG paid for itself on this one job.
The contractor saved money on labor, equipment rental, and rework. He also avoided penalties for late delivery. The project finished ahead of schedule. The owner was happy.
YG Service for Your Hydraulic Wall Saw
YG Machinery did not just sell a machine. The team handled the full process.
The team prepared CE documents for Qatar customs. The equipment shipped from factory to Hamad Port. YG tracked every step. When the machine arrived, a YG engineer joined a video call. He guided the crew through track setup, blade installation, and hydraulic connection. The team practiced on a test wall. They were ready in two days.
The YG-700TM also matched Qatar’s 380V/50Hz power. No transformer was needed. The crew used a Remote-Controlled Wall Saw for the first time. They liked the safe distance from the cutting area. YG also provided English manuals and a local spare parts list.
Contact YG Machinery for a quote. Whether you need a Concrete Wall Saw Cutting Machine or a High Frequency Wall Saw, we will help you choose the right model and get it to your site fast.【WhatsApp/WeChat/Phone/Skype】+86 13937183602
