

A 3 Ton Spider Crane for a Building Project in South Africa
A construction contractor in Johannesburg, South Africa, needed a 3 ton spider crane for a commercial building project. The team had to lift steel support frames and building materials into several installation positions.
However, the site had limited working space. A narrow access route connected the main yard to the work area. Nearby walls and stored materials also made crane positioning difficult.
The contractor first considered a truck crane. But its size and setup requirements did not suit the site conditions. The customer then searched for a smaller lifting machine and contacted YG Machinery after finding our equipment online.
The customer shared project photos, load requirements, and access dimensions. Our team used this information to assess a suitable crane.
Selecting a 3 Ton Crawler Spider Crane
The customer needed a crane that could handle the planned loads without taking up too much space. Site mobility was another important factor.
YG Machinery discussed several points with the contractor:
- Maximum load weight
- Required lifting height
- Working radius
- Access width and turning space
- Ground conditions and outrigger positions
After reviewing these requirements, we recommended the YG-3. This Compact Spider Crane has a tracked undercarriage and a compact body. Its hydraulic motor drives the tracks, allowing movement across suitable construction surfaces.
The customer also asked about remote operation. The YG-3 supports an optional remote-control configuration. After discussing the available setup, the contractor confirmed the machine with the required operating option.


3 Ton Spider Crane: YG-3 Specifications
Before confirming the order, the customer reviewed the main specifications of the recommended model.
| Parameter | YG-3 Specification |
| Lifting Capacity | 3 t |
| Max Working Radius | 8.83 m × 0.15 t |
| Max Lifting Height | 9.9 m × 0.7 t |
| Hook Speed (4 rope) | 0–8 m/min |
| Rope Diameter × Length | φ8 mm × 45 m |
| Boom Type | 5-section, pentagonal |
| Boom Length / Extension Time | 3.1–9.2 m / 20 sec |
| Boom Angle Range / Time | 0°–78° / 13 sec |
| Slew Angle / Speed | 360° continuous / 60 sec/rev |
| Drive System | Hydraulic motor |
| Walking Speed | 0–2.5 km/h |
| Grade Ability | 25° (36%) |
| Operation | Manual + remote option |
| Dimensions (L×W×H) | 2950 × 980 × 1560 mm |
| Total Weight | 2700 kg |
The customer paid close attention to the working radius and lifting height. The maximum working radius corresponds to a 0.15 t load, while the maximum lifting height corresponds to a 0.7 t load.
These conditions are important when planning a lift. The crane’s rated capacity does not apply at every boom position. Operators must follow the load chart and confirm the actual working conditions before lifting.

Preparing the Mini Spider Crane for Shipment
After order confirmation, YG Machinery arranged factory inspections.
The team checked the hydraulic system, crawler tracks, telescopic boom, wire rope, and hook assembly. The outrigger extension and retraction functions were also inspected.
The operating system was tested according to the confirmed configuration. After the checks, the crane was prepared for export transportation.
YG Machinery secured the equipment for shipment and organized the necessary product documents. The customer received the shipping information and prepared for customs clearance and inland delivery in South Africa.
Putting the 3 Ton Spider Crane to Work
After the equipment arrived in Johannesburg, the customer arranged transportation to the construction site.
The operators first checked the access route and selected a suitable working position. They then deployed the outriggers and checked the ground support and machine level.
Before each lifting task, the team confirmed the load weight, working radius, and boom position. The operators followed the load chart to keep each lift within the permitted capacity.
The crane handled steel support frames and other building materials that matched its working limits. Its tracked chassis also helped the team move between suitable working positions.
With the optional remote-control setup, the operator could control crane movements from a suitable position with a clear view of the load. This Remote Control Spider Crane configuration suited the customer’s planned operating method.


Project Results with the 3 Ton Crawler Spider Crane
The YG-3 provided a practical lifting option for the contractor’s restricted work area.
Its compact dimensions helped with access. The crawler system supported movement around suitable site surfaces. The outriggers provided a stable base when correctly deployed on suitable ground.
The customer also gained more flexibility when arranging lifting positions. The machine could handle several planned material-handling tasks without requiring a larger crane for every lift.
This Small Crawler Spider Crane was selected because its dimensions and lifting performance matched the project’s requirements. The case also shows why buyers should assess working radius, load weight, and site access together instead of choosing a crane by rated capacity alone.
Spider Crane for Sale: Frequently Asked Questions
Q1: Why did the South African contractor choose the YG-3?
The contractor needed a compact crane for lifting work in a restricted construction area. The YG-3 matched the planned loads and site access conditions.
Q2: Can the YG-3 move through narrow access routes?
Its compact body and tracked undercarriage support movement through suitable narrow routes. Buyers should check doorway width, turning space, and ground conditions before ordering.
Q3: Does the YG-3 support remote operation?
Yes. Remote control is an optional configuration. Customers should confirm this requirement when requesting a quotation.
Q4: How can I choose a suitable spider crane for a project in South Africa?
Provide the expected load weight, lifting height, working radius, access dimensions, and ground conditions. YG Machinery can use these details to help assess a suitable configuration.

Contact YG Machinery
Looking for a Spider Crane for Sale for a construction or installation project? Contact YG Machinery with your project requirements. Our team can help you review the specifications, confirm the available configuration, and request a quotation for your destination.









