Road, bridge, and urban projects are growing fast across DR Congo. But many sites are remote, with unreliable power. Ready-mix concrete is often unavailable or too expensive to deliver. These delays raise costs and push deadlines. A Self Loading Mixer Truck solves this by loading, mixing, and discharging concrete directly on site.
One road contractor in Kolwezi, Lualaba Province, needed a self-contained concrete solution for a rural road project. They chose the YG3.5 C Self Loading Mixer Truck from YG Machinery.
Specifications of Self Loading Concrete Mixer Machine
| Model | YG3.5 C |
| Output per Lot | 3.5 m³ |
| Production Capacity | 15.5 m³/h |
| Engine Power | 85 KW |
| Climbing Capacity | 40° |
| Weight | 8250 KG |
| Length/Width/Height | 7300 × 2750 × 3350 mm |
| Wheelbase | 2750 mm |
Customer Challenges for Self Loading Concrete Mixer Truck
- Distant batching plant and unstable power. The nearest plant was over 60 km away. Daily power outages stopped production and made scheduling impossible.
- Remote, unpaved access. The 22-km route passed through bushland and small villages. No paved roads meant slow, costly ready-mix delivery, especially in rain.
- Too many rented machines. The contractor rented a loader, a mixer truck, and a water truck separately. Three machines meant three operators, three fuel bills, and three breakdown risks.
- Poor mix control and high waste. Manual batching caused uneven ratios. Some road sections failed strength tests and had to be redone. Spillage and rejected loads added daily losses.
- Tight rainy-season deadline. The client required completion before the rains. Penalty clauses applied for delays. Every lost hour increased the risk.
- Need for on-site independence. The contractor needed one machine to load, mix, and discharge at the pour point. It had to work off-grid, climb steep sections, and handle muddy roads.
They needed a self loading cement mixer for sale that could work off-grid, handle rough roads, and produce consistent concrete on demand.
Self Loading Mixer Truck Solution
YG Machinery recommended the YG3.5 C. This mixer unit matched the project needs.
- 40° climbing capacity for steep, unpaved sections.
- 15.5 m³/h output for daily road pouring targets.
- 85 KW diesel engine with no grid power needed.
- 3.5 m³ output per batch for roads and small structures.
- One-person operation for loading, mixing, and discharging.
As a self mixing concrete truck, it loads, mixes, and discharges at the pour point. It also works as a self loading mobile concrete mixer for remote road sections. The machine arrived fully assembled and was working within two weeks.
Self Loading Mixer Concrete Results & Advantages
Quantified Results:
- Daily concrete output rose by 42%, from 55 m³ to 78 m³. This kept the paving crew ahead of schedule and reduced idle time between pours.
- Labor costs dropped by 55% with one operator. The contractor reassigned two workers to other tasks, cutting daily payroll without slowing production.
- Concrete waste fell below 3%, down from over 10% with manual batching. Precise weighing and on-site mixing nearly eliminated rejected loads.
- The project finished 18 days ahead of schedule. The contractor avoided rainy-season penalties and started the next road section early.
- Fuel cost per cubic meter decreased by 28%. No more long trips to the batching plant and no separate loader or water truck running all day.
Product Advantages:
- All-in-one loading, mixing, and transport. The Self Loading Mixer Truck replaces a loader, a mixer truck, and a water truck. One machine does the full job.
- 4×4 drive for muddy rural roads and slopes. With a 40° climbing capacity, it reaches sections that ready-mix trucks cannot. It performs well as a self loading mobile concrete mixer in remote areas.
- Automatic weighing for consistent mix quality. The operator sets the ratio once. Every batch meets the same strength standard, reducing rework and testing failures.
- Fast deployment after shipping. The machine arrives fully assembled. It was working on site within two weeks of arrival in DR Congo.
- Fewer machines mean lower maintenance and spare parts costs. One engine, one hydraulic system, and one set of wear parts. This cuts downtime and simplifies servicing in remote locations.
As a self mixing concrete truck, it also reduced dependence on outside suppliers. The contractor now controls the entire concrete process from loading to discharge.
FAQ About Self Loading Concrete Mixer Machine
Q1: How much does this machine cost?
A: The price depends on the model and configuration. Please contact our sales team for a factory-direct quotation.
Q2: Can it work without electricity?
A: Yes. It runs on its own diesel engine for loading, mixing, and discharging.
Q3: How long is delivery to DR Congo?
A: Delivery to Matadi or Dar es Salaam usually takes 25–35 days after order confirmation.
Q4: Is operator training included?
A: Yes. We provide on-site training or remote video guidance. Most operators work independently within 2–3 days.
About YG Machinery Self Loading Concrete Mixer Truck
YG Machinery is a professional construction equipment manufacturer with over 15 years of experience. We provide factory-direct pricing and after-sales support for contractors worldwide. Besides the Self Loading Mixer Truck, we also offer Static Concrete Pump, Mini Concrete Pump Machine, Concrete Delivery Pump, and other concrete solutions. Contact us today for a free quote and expert advice.【WhatsApp/WeChat/Phone/Skype】+86 13937183602
