

Track Mounted Wall Saw for Reinforced Concrete Cutting
A Track Mounted Wall Saw is designed for cutting thick concrete walls and reinforced concrete structures. It uses a diamond blade that moves along a fixed guide rail, helping operators make straight and controlled cuts. This cutting method works well for building renovation, structural modification, and demolition projects. YG Machinery supplies hydraulic models for contractors who need deep cutting performance and stable operation on demanding job sites.
Technical Parameters of the Concrete Wall Saw
YG Machinery offers two models to meet different cutting requirements. The YG600TM supports blades up to 1400 mm, while the YG700TM accepts blades up to 1600 mm and provides a maximum cutting depth of 730 mm.
| Specification | YG600TM | YG700TM |
| Saw blade diameter range | 800–1400 mm | 800–1600 mm |
| Cutting depth | 620 mm | 730 mm |
| Blade center hole | 60 mm | 60 mm |
| Saw blade life | Cut 20 square | Cut 20 square |
| Max. working pressure | 180 bar / 18 MPa | 200 bar / 20 MPa |
| Max. oil flow rate | 100 L/min | 100 L/min |
| Gearing | Gear | Gear |
| Rotation speed | 450/900/1350 rpm | 600/850/1400 rpm |
| Dimensions | 400 × 420 × 400 mm | 400 × 420 × 400 mm |
| Weight | 38 kg | 39 kg |

How the Track Mounted Wall Saw Works
The machine uses three main systems to complete a controlled cut.
- Diamond blade: Its diamond segments grind through concrete and reinforcing steel. The blade should match the material and cutting conditions.
- Guide rail: Operators fix the rail to the wall before installation. The saw head travels along this rail, keeping the blade aligned with the cutting path.
- Hydraulic drive: Hydraulic oil powers the motor and turns the blade. This setup provides strong cutting force for thick and reinforced structures.
Water is also supplied during cutting to cool the blade and help control dust. For projects that need a different cutting method, YG offers a High Frequency Wall Saw for comparison.
Main Advantages of This Concrete Wall Saw
A well-designed cutting system can improve work quality and reduce unnecessary labor on site.
Straight and accurate cuts
The rail guides the saw head along a planned line. This helps create clean openings and reduces the need for extra edge correction.
Suitable for demanding jobs
The hydraulic drive provides the power needed for heavy concrete cutting. It is a practical choice for contractors working with reinforced walls and large structures.
Flexible cutting setup
Operators can select a suitable diamond blade according to the material and job requirements. This makes the machine useful for different wall-cutting tasks.
Convenient machine handling
The saw head has a compact structure, making it easier to transport and position during site preparation.


Applications of the Track Mounted Wall Saw
This hydraulic wall saw supports several types of construction and renovation work.
- Building renovation: Cut new doorways, windows, and ventilation openings in existing concrete walls.
- Bridge and tunnel projects: Remove selected concrete sections during repair or structural modification.
- Industrial facilities: Create openings for pipes, cables, ducts, and new equipment installations.
- Controlled demolition: Divide large concrete structures into smaller sections for easier removal.
For larger structures or cutting areas that are difficult to reach with a blade, contractors can also consider YG’s Hydraulic Wire Saw Cutting Machine.
Choosing a Wall Saw Machine for Sale
Before purchasing, check the actual conditions of your project rather than choosing a machine based on blade size alone.
First, measure the wall thickness and confirm the required cutting depth. Then consider the concrete strength and the amount of reinforcing steel. These details help determine the suitable blade and machine configuration.
You should also check the hydraulic power source, water supply, rail installation conditions, and available working space. If your project requires a Remote Controlled Wall Saw, confirm the control system and available configuration with the supplier before ordering.
For lighter cutting tasks, an Electric Wall Saw may also be worth comparing with a hydraulic model. A Rail Mounted Wall Saw is particularly useful when the job requires a guided cutting path along a concrete surface.


FAQs About the Concrete Wall Saw
Q1: Can this machine cut reinforced concrete?
Yes. With a suitable diamond blade, it can cut through concrete and reinforcing steel. The blade should match the material and working conditions.
Q2: How do I choose between YG600TM and YG700TM?
Consider your required cutting depth and blade diameter. The YG700TM is suitable when the project requires a deeper cut or a larger blade.
Q3: Why does the machine need a guide rail?
The rail supports and guides the saw head. It helps maintain a straight cutting path and improves accuracy during operation.
Q4: Does the machine need water during cutting?
Yes. Water helps cool the diamond blade and control dust. Make sure the water supply is suitable for the working conditions.
Get a Concrete Wall Saw for Sale from YG Machinery
YG Machinery supplies concrete cutting equipment for construction contractors, demolition companies, and international buyers. If you need a Concrete Wall Saw for Sale for deep cutting or reinforced concrete work, our team can help you compare models and confirm the right configuration.
Send us your wall thickness, cutting requirements, and project details. Contact YG Machinery today to request product information and a competitive quotation.









